THEY CAN ACCOMMODATE SOME AMOUNT OF MISALIGNMENTS OF SHAFT. OF THES...
5. They can accommodate some amount of misalignments of shaft.
Of these statements
(a) 1, 2, 3 and 4 are correct
(b) 1,3 and 4 are correct
(c) 1, 4 and 5 are correct
(d) 1, 2, 3 and 5 are correct.
IES-15Ans. (a) Self aligning bearing can accommodate some amount of misalignments of
shaft.
IES-16. Removal of metal particles from the raceway of a rolling contact bearing is
a kind of failure of bearing known as
[IES-1995]
(a) Pitting
(b) wearing
(c) spalling
(d) scuffing
IES-16Ans. (a)
Load-life RelationshipIES-17. The rated life of a ball bearing varies inversely as which one of the
following?
[GATE-1993; IES-2004]
(a) Load
(b) (load)
2
(c) (load)
3
(d)
(load)
3.33
d
P
= ⎜ ⎟
⎛ ⎞
⎝ ⎠
d = dynamic load capacity
IES-17 Ans. (c)
L
,
R
R = Equivalent bearing load
p = 3 for ball bearing
=
10
3
for roller bearing.
IES-18. If the load on a ball bearing is halved, its life:
[IES-2005]
(a) Remains unchanged
(b) Increases two times
(c) Increases four times
(d) Increases eight times
d
3
= ⎜ ⎟
⎛ ⎞
⎝ ⎠
d is dynamic load carrying capacity. R is actual load applied if R
IES-18Ans. (d)
L
R
halved L will increased by 2
3
= 8 times
Design of Bearings
S K Mondal’s
Chapter 4
Selection of Taper Roller Bearings
IES-19. Assertion
(A):
Tapered roller bearings are sensitive to the tightening between
inner and outer races.
[IES-2002]
Reason (R): Tapered roller bearings are always provided with adjusting nut for
tightening.
(a) Both A and R are individually true and R is the correct explanation of A
(b) Both A and R are individually true but R is not the correct explanation of A
(c) A is true but R is false
(d) A is false but R is true
IES-19Ans. (b)
IES-20. Which bearing is preferred for oscillating conditions?
[IES-1992]
(a) Double row roller bearing
(b) Angular contact single row ball bearing
(c) Taper roller bearing
(d) Needle roller bearing
IES-20Ans. (d)
IES-21. Match List-I (Bearings) with List-II (Applications) and select the correct
answer using the codes given below the lists:
[IES-2001]
List I
List II
A. Cylindrical roller
1. Radial loads
B. Ball-bearing
2. Machine needs frequent dismantling
and assembling
C. Taper rolling bearing
3. Radial loads with lesser thrust
D. Angular contact ball-bearing 4. Shock loads